| TECHNICAL SPECIFICATION |
| S. No. |
Description |
BA - 25 |
BA - 50 |
BA - 100 |
| 1. |
Capacity (acetylene with purity as per IS-30B) Cubic Meter per hour |
25 |
50 |
100 |
| 2. |
Process water required (liters/kg of calcium carbide processed) |
8 -10 |
8 -10 |
8 -10 |
| 3. |
Calcium carbide required (kg/N.cubic meter of gas) |
4 |
4 |
4 |
| 4. |
Calcium chloride required (gms/N.cubic meter of gas) |
50 |
50 |
50 |
| 5. |
Cooling water make-up required (liters/N.cubic meter of gas) |
10 |
10 |
10 |
| 6. |
Power required (average requirement) |
12kw |
15kw |
28kw |
| 7. |
Purifying mass required (gas plus acid absorption mix per cum of gas) |
15 gms/N.Cum + 4 gms |
15 gms/N.Cum + 4 gms |
15 gms/N.Cum + 4 gms |
| 8. |
Instrument/Process air |
70 liters/minute |
70 liters/minute |
70 liters/minute |
| 9. |
Acetone |
As required |
As required |
As required |
| 10. |
Hydraulic oil required (for screw feed system) |
Equivalent to SAE - 30 |
Equivalent to SAE - 30 |
Equivalent to SAE - 30 |
| 11. |
Lubricating oil required (for compressor) |
Hylube HDX-40 |
Hylube HDX-40 |
Hylube HDX-40 |
| 12. |
Power Supply |
440 Volts/3 phase/50 hertz |
440 Volts/3 phase/50 hertz |
440 Volts/3 phase/50 hertz |
| EQUIPMENT SCHEDULE |
| S. NO |
Description |
S. NO |
Description |
| 1 |
CARBIDE HOPPER |
11 |
GAS LINES |
| 2. |
ACETYLENE GENERATOR |
12. |
CONDENSER |
| 3. |
L.P. DRYER |
13 |
AUTOMATIC SCREW FEED |
| 4. |
PURIFIER |
14. |
AGITATOR |
| 5. |
AMMONIA SCRUBBER |
15. |
TEMPERATURE CONTROLLER |
| 6. |
ACETYLENE COMPRESSOR |
16 |
PRESSURE CONTROLLER |
| 7 |
H.P. DRYER |
17 |
LEVEL CONTROLLER |
| 8. |
CYLINDER FILLING MANIFOLD |
18 |
SLURRY DISCH ARGE CONTROL |