| 1. |
MEDIUM PRESSURE STATIONERY ACETYLENE GENERATOR:
Carbide to water type along with the accessories with hopper for feeding the calcium carbide
|
| |
| 2. |
INSTRUMENTS
Instruments - Temperature and Pressure
|
| |
| 3. |
PRE-COOLER
M. S. Vessel with tube arrangement for cooling Gas
|
| |
| 4. |
LOW PRESSURE DRIER:
Vertical M.S. Vessel fitted with Half Circle perforated M.S. Plates filled with one charge Hydrous Calcium Chloride
|
| |
| 5. |
ACETYLENE PURIFIER:
Large vessel divided into two section wire mesh frame work. The inside of vessel is coated with Chlorinated Rubber Paint as anti-corrosive measure. Each section is charged with f Purifying Mass to absorb gases like Hydrogen Sulphide, Phosgene, etc.
|
| |
| 6. |
AMMONIA WASHER:
Vertical vessel fitted with Level Gauge and Water Make Up Line. The Acetylene Gas is bubbled in the vessel to:
a) to scrub water soluble impurities like Ammonia
b) To facilitate compression of Acetylene Gas by making it wet.
|
| |
| 7. |
ACETYLENE COMPRESSOR- of rated capacity (Three Stage Type), Normal Reciprocating Piston Type, Oil Lubricated water submerged with Safety Valves, Pressure Gauges, Moisture Separators, Flame Proof Motor with Pulley, V-Belts and Belt Guard, Pneumatically Pressure Controlled). All three stages of the Compressor are provided with a Pressure Gauges to monitor the inter stage pressure |
| |
| 8. |
BATTERY OF HIGH PRESSURE DRIERS filled with Anhydrous Calcium Chloride and with Non-return Valve and Pressure Regulating Valve. It consists of three columns. The First Column is fitted with M.S. chain Packing to avoid any void. The Second and Third Columns are fitted with two capsules each and are fitted with a Drain Valve to drain off moisture collected at the bottom periodically. |
| |
| 9. |
ACETYLENE FILLING MANIFOLD for filling cylinders each complete in all respects fitted with Filling Connections, Flash Back Arrestors, Pressure Gauge and Non-return Valves, Stainless Steel Braided Teflon loose connection with Brass Bull Nose and Brass Nut. |
| |
| 10. |
MOTORIZED ACETONE PUMP:
Rotary Gear Pump made of Stainless Steel fitted with 0.5 HP flame Proof Motor for filling Acetone into Cylinders.
|
| |
| 11. |
Complete set of ACETYLENE GAS LINES as per our standard layout for Low and High Pressure with complete fittings. M. S. Seamless Sch. 40 Pipes for High Pressure Line Galvanized Iron 'C' Class heavy Duty Pipes for Low Pressure. |
| |
| 12. |
NO LOSS CARBIDE CHARGE |
| |
| 13. |
LEVEL CONTROLS |
| |
| 14. |
LEVEL ALARM |
| |
| 15. |
PRESSURE ALARM |
| |
| 16. |
SCALE CYLINDER WEIGHT |
| |
| 17. |
DRAIN BACK MANIFOLDS
|
| |